The Replacement of the Excavator Bucket Teeth

The bucket tooth of an excavator is an important consumable part of an excavator, just like a human tooth. It is a bucket tooth formed by the combination of a tooth tip and a tooth seat, and the two are connected by a pin. Since the worn-out part of the bucket tooth is the tip of the tooth, it is enough to replace the tip. Do you know the replacement of the excavator bucket tooth? As a reliable supplier, Yongfeng will share it with you.

Bucket Tooth Replacement Cycle

The construction environment of an excavator directly determines the degree of wear of the bucket teeth and the frequency of replacement. For example, if the excavator is doing earthwork or sandy soil engineering, it is almost the same as replacing it twice a year, because the degree of wear will be much smaller.

However, if it is a quarry or rock project, the replacement cycle will be much shorter, especially for hard stones such as granite. It is commonplace to replace it once a week. Therefore, the quality of the teeth, the operation method and the construction environment determine the teeth. Replacement time.

                                   Rock Chisel Tooth

When Replace the Bucket Teeth, Which One is Better?

This will involve what kind of excavator you are and which scene you are mainly using.

*General bucket teeth:

Hardness granules moderate toughness, general working conditions.

*Bucket teeth for minerals:

High hardness, moderate impact toughness, used for severe impact conditions.

*Special bucket teeth:

High hardness, high impact toughness, used for working conditions with severe wear and impact.

How to Maintain Bucket Teeth and Tooth Seats?

First of all, choosing the right bucket teeth is an important factor in prolonging your excavator's working life and stronger penetrating power, because matched bucket teeth and their accessories are the prerequisite for faster excavator working cycle and saving raw materials.

Secondly, during the use of the bucket teeth of the excavator, the outermost tooth of the bucket is 30% faster than the innermost wearing part. Therefore, after a period of time, you can change the position of the inside and outside of the bucket or rotate it to a certain extent. To ease and provide productivity.

Then, when operating the excavator, it is best to dig under the bucket teeth perpendicular to the working surface to avoid breaking the bucket teeth due to excessive inclination.

Finally, coating tungsten coatings on bucket teeth and other accessories can effectively reduce maintenance costs and improve machine efficiency.

We specialize in producing bucket teeth, adapters, side cutters, cutting blades, bucket protectors and fasteners for a range of different earthmoving equipments and applications.

we supply replacement bucket teeth as follow:

Caterpillar bucket teeth

Komatsu Bucket Teeth

Volvo Bucket Teeth

Daewoo Bucket Teeth

If you want to learn more about our produvts, please contact us.